- This topic has 3 replies, 3 voices, and was last updated 9 years ago by
.
STANNAH 300 SHUTTING DOWN
-
-
This Stannah 300 shut itself off just before it reached the bottom of the stair. I brought it down manually (isolator switch to 0). When I put isolator switch back on, circuit board lights up, lift moves 6 inches or more and shuts down. Seems as though shutting down is for no reason…no obstacles for switches. Lift moves in both directions, just wont stay running. Any thoughts?? I have diagram, on inside cover.
Pete -
When the lift stops after 6 inches which LED lights up? Sounds like a battery fault but if it happens in down travel its not unheard of for the motor to fail in these.
-
If switching the lift off, and then back on allows the lift to operate a little before shutting down yet again, i tend to agree with Rik – most likely the batteries. Motors can also fail, in this case I would think of worn brushes, if tapping the motor allows starts the lift again, time to consider options of cost against repair or renew.
-
How old is the lift, is it one of the older units with a trailing cable by any chance?
-
You must be logged in to reply to this topic.
