News Feed › Forums › Stairlifts › acorn bison 80 stairlift › Reply To: acorn bison 80 stairlift
-
Ian, I’ve read this post several times now because I’m having the same issue, but I’m not understanding your response. My lift is on a charging point, there are 33v at the charging plates, the batteries currently are low but not dead, and the lift will not charge the batteries (no voltage at the +/- blades on the board where the batteries connect). Aside from the two 25a blade fuses on the batteries and the one glass fuse on the front of the main board (mid height, right side when board is installed), are there any other fuses in the system that would have anything to do with charging? As I’ve stated, the batteries have enough power for the lift to be useable, but the lift isn’t charging them. It continues to beep whether it’s on a charging point or off.