Forum › Forums › Stairlifts › Stannah 420 › Reply To: Stannah 420
should be on the AP plug, pins 2 and 3 grey/black orange/black and pins 4 and 5 pink/black white/black, depending on the handing of the lift? lhd/rhd
there may be a wiring diagram stuck to the back of the footrest panel? will need to pull that off to get to the seat loom plug as the circuit for the stop switches contains the seat swivel switches, so you can test the stop switches separately between the AP plug and the 12 way seat plug if needed
if you look at the rail you will see two white arrow heads sticking out, one is the slowing ramp the other the stopping ramp, the switch you looking for, is on the front of the carriage under the footrest, will be a set of three, top and bottom stop switch and the middle on the over travel switch, they clip into the carriage cover and can be pulled out if you can get to them
the switch
https://www.stairlift-spares.co.uk/shop/product/stannah-limit-switch-n-c-contacts/