Reply To: How to deal with Acord 180 with T565 J3 error code

[Tom]

March 19, 2021 at 11:15 pm

Thanks Terry,

With your help I was able to get into the Programming mode. I followed all of the instructions through P1, P2, and P3. I now have another problem. Going down from the top of the stairs the carriage makes it through the turn at the landing and then stops with a J3. Pressing the down button again moves the carriage about 1/4 inch. After several attempts I get a F8 (Tilt Limit Switch). If I level the carriage the F8 goes away and then I eventually am able to complete the down travel.