I obtained a second hand charging pin complete with plastic mouldings – which are different to mine, but the pin is the same length. The new spring carrier is 5mm shorter but otherwise the same so I turned up a little nylon spacer to make up the difference. It all goes together ok, the slowing switch opens before the ultimate limit switch as I push the charging pin in, and when I drive the chair slowly with a battery drill in the manual winder the ultimate limit switch doesn’t open as the pin passes the slowing ramp. I want to get everything else set up correctly and I’m curious to know what should trip the ultimate limit switch as there’s nothing else in the way before the chair hits the end stop of the track?
Chris
