I seem to a have a working stairlift again! Thanks again to Kevin and Spike for their help.
Compared to the left, the right side plate that actuates the right limit switch looked very slightly bent as if the switch hadn’t worked and the chair carried on and came to a hard stop against the sprung finger, but that’s just a theory. I checked the left and right limit switches and they are fine, opening with just a mm or so movement. The chair slows and stops as expected.
I’ve only run the chair over a few feet at the top of the stairs as the track is pretty well covered in dust and grease and cleaning just that bit took a while. I now have hours of entertainment cleaning all the rest…
What is your suggestion for lubricating the track once it’s clean?
Chris
