News Feed › Forums › Stairlifts › Stannah 420 Installation manual and query › Reply To: Stannah 420 Installation manual and query
-
yes its possible to set it to charge on the hinge section, would need to lock off the hinge with the transit plate two 13mm bolts under the rail, loosen them, slide the plate down and tighten them up, so it cant lift! then replace the central copper strip so that it runs the full length of the rail, the charge strip, then disconnect the hinge motor, thats the easiest way to do it! otherwise its a carriage cover off job and reverting it all back to a non hinge lift