Reply To: Acorn Superglide 120 with T498 PCB (New Member Requesting Advice)

[djpeng]

December 2, 2021 at 6:32 pm

Clive,

Thank you for your assistance and advice.

I have now replaced the batteries and the stairlift is now working and I have run it up and down a few times.

When reaching the bottom stop there is a ‘C’ code (Batteries) followed by a ‘1’ code (Normal). We then get a flashing ‘E’ code (Brake) followed by a ‘9’ (Carriage Up).

Not sure what this is about?

However, the latter does not seem to affect the operation of the lift.

Any further thoughts/advice on these code displays would be welcome.